Roma Logo
Translate ROMABIO Paints Website
EnglishFrenchGermanItalianSpanish
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH

TerraMare I

Silossanic Paint

TDS
PDF files for Download

ROMABIO’s TerraMare I is a full spectrum color, hydro-repellent paint product that can be applied directly on absorbent acrylic painted surfaces or on properly prepared surfaces while maintaining excellent permeability. Product can be applied to all types of wall surfaces, creating very slight chromatic shading, with a very flat sheen.

TerraMare I is a ROMABIO Primary ECO-Series Product.

Criteria Int. Standard Value Unit
TVOC & VOC (including tint pigments) 2004/42/CE Primer, Max. Value 40g/lt 2010 12 g/l
Water Absorption Coefficient EN 1062-3 – DIN 52617 > 0.07 kg/(m²•√h)
Vapor Permeability EN 1062-1/UNI 10795 < 180 m / Sd 0.010 high g/m² (24 h)
Whiteness CIE 65 %
Surface Retention Smog/Dirt EN 10795 Very Low > 3
Drying Time at Low Temperature UNI 10793 > 5 °C
Application on New Cement UNI EN 13300 Ideal
Exterior Silossanic Paint DIN 18363 paragraph 2.4.1 Y Yes
Application Quality UNI 10794 Good
Hide and Cover Capacity ISO 6504-3 M.U. 1631 (RC 100 μm Humid) Class 1
pH value DIN 19266 7.5 – 8
Resistance to Mold DIN 19266 Product ideal to mold and algae resistance for exterior application Aspergillus Niger, Penicillum ochrochloron Pullularia pullulans
Alkaline Resistance UNI 10795 Excellent mm
Specific Weight (23°C) EN ISO 2811-2 130 Kg/lt
Granulation DIN 19643 – EN 21524 0.01 mm
Gloss Level UNI EN ISO 2813 < 5 Very Flat
Reaction to Fire EN 13501-1:2002 A A 1
Toxicity EN 13501-1:2002 Non-Toxic
APEO (Alkyl Phenol Ethoxylates) 0%
PEG (Polyethylene Glycol) 0%
PG (Propylene Glycol) 0%
Biocides 0%

Does not contain chemicals that can aggravate or cause asthma, see NIH Asthma Report 2012.

Testing & Certification

Coming Soon...

We will have 3rd party testing for all of our products but please be patient as we are a growing company.

To get the latest updates and news from ROMA, sign up for our email newsletter:

1 Identification of the Substance/Mixture & 0f the Company/Undertaking

1.1 Product Identifier

Code     None
Product Name     TerraMare I

1.2 Relevant Identified Uses of the Substance or Mixture & Uses Advised Against

Intended Use     Silossanic Emulsion Paint For Exterior

1.3 Details of the Supplier of the Safety Data Sheet

  • Name : ROMABIO – Eco-Sustainable Building Technologies
  • Full Address : 554 North Avenue NW, Suite B
  • District & Country Atlanta, GA 30318 | United States of America (USA)
  • 678-905-3700

1.4 Emergency Telephone Number

For Urgent Inquiries Refer To : Call 911 if you have a poison emergency.
Call the CDC if swallowed but person is alert 1-800-222-122

2 Hazards Identification

2.1 Classification of the Substance or Mixture

The product is classified as hazardous pursuant to the provisions set forth in Directives 67/548/EEC and 1999/45/EC and/or EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). The product thus requires a safety data sheet that complies with the provisions of EC Regulation 1907/2006 and subsequent amendments.

Any additional information concerning the risks for health and/or the environment are given in sections 11 and 12 of this sheet.

DANGER SYMBOLS     None

2.2 Label Elements

This product is not subject to hazard labeling pursuant to Directives 67/548/EEC and 1999/45/EC and subsequent amendments and supplements.

  • WARNING SYMBOLS : None
  • HAZARD SENTENCES® : None
  • CAUTION RECOMMENDATION(S) : None

2.3 Other Hazards

Information not available.

3 Composition/Information on Ingredients

3.1 Substances

Information not relevant.

3.2 Mixtures

The product does not contain substances classified as being hazardous to human health or the environment pursuant to the provisions set forth in Directives 67/548/EEC and/or EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements).

First Aid Measures

4.1 Description of First Aid Measures

No harm to the staff authorized to use has been reported. However, in case of contact, inhalation or ingestion, the following general measures provided for a first aid shall be taken.

  • EYES & SKIN : Wash with plenty of water; if the irritation persists, seek medical advice.
  • INHALATION : Remove to open air. If respiration is difficult, administer artificial respiration and seek medical advice.
  • INGESTION : Seek medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.

4.2 Most Important Symptoms & Effects, Both Acute & Delayed

No episodes of damage to health ascribable to the product have been reported.

4.3 Indication of Any Immediate Medical Attention & Special Treatment Needed

Follow doctor’s orders.

5 Firefighting Measures

5.1 Extinguishing Media

SUITABLE EXTINGUISHING MEDIA
The extinction equipment should be of the conventional kind: Carbon Dioxide, Foam, Powder and Nebulized Water.

EXTINGUISHING MEDIA WHICH SHALL NOT BE USED FOR SAFETY REASONS
None in particular.

5.2 Special Hazards Arising From the Substance or Mixture

HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products (carbon oxide, toxic pyrolysis products, etc.).

5.3 Advice for Firefighters

GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.

SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Hardhat with visor, fireproof clothing (fireproof jacket and trousers with straps around arms, legs and waist), work gloves (fireproof, cut proof and antistatic), a depressurized mask with facemask covering the whole of the operator’s face or a self-respirator (self-protector) in the event of large quantities of fume.

6 Accidental Release Measures

6.1 Personal Precautions, Protective Equipment & Emergency Procedures

If there are no contraindications, spray powder with water to prevent the formation of dust. Use breathing equipment if powders are released into the air. These indications apply for both processing staff and those involved in emergency procedures.

6.2 Environmental Precautions

The product must not penetrate the sewers, surface water, ground water and neighboring areas.

6.3 Methods & Material for Containment & Cleaning Up

Use mechanical tools to collect leaked product and eliminate the remainder using jets of water. Make sure the leakage site is well aired.

Contaminated material should be disposed of in compliance with the provisions set forth in point 13.

6.4 Reference to Other Sections

Any information on personal protection and disposal is given in sections 8 and 13.

7 Handling & Storage

7.1 Precautions for Safe Handling

Do not smoke while handling and use.

7.2 Conditions for Safe Storage, Including Any Incompatibilities

Normal storage conditions without particular incompatibilities.

7.3 Specific End Use(s)

Information not available.

8 Exposure Controls/Personal Protection

8.1 Control Parameters

Information not available.

8.2 Exposure Controls

None required.

HANDLING PROTECTION
None required.

EYE PROTECTION
None required.

SKIN PROTECTION
None required.

RESPIRATORY PROTECTION
None required.

9 Physical & Chemical Properties

9.1 Information on Basic Physical & Chemical Properties

Appearance Liquid
Color Color Palette
Odor Characteristic
Odor Threshold
pH 7 – 8
Melting or Freezing Point
Boiling Point
Distillation Range
Flash Point > 61°C
Evaporation Rate
Flammability of Solids & Gases
Lower Inflammability Limit
Upper Explosive Limit
Lower Explosive Limit
Vapor Pressure
Vapor Density
Specific Gravity 1,300 Kg/lt
Solubility Water
Solvent Separation Test
Solid Content
Partition Coefficient: Octanol/Water
Ignition Temperature
Decomposition Temperature
Viscosity 1,1200 mPa.s
Reactive Properties

9.2 Other information

VOC (Directive 2004/42/EC) 12.00 g/lt

Matt coatings for interior walls and ceilings. EU limit value for this product
(cat. A / a): 75 g/lt (2007) / 40 g/lt (2010).

10 Stability & Reactivity

10.1 Reactivity

There are no particular risks of reaction with other substances in normal conditions of use.

CALCIUM CARBONATE     Decomposes at temperatures above 800°C.

10.2 Chemical Stability

The product is stable in normal conditions of use and storage.

10.3 Possibility of Hazardous Reactions

No hazardous reactions are foreseeable in normal conditions of use and storage.

10.4 Conditions to Avoid

None in particular, however the usual precautions used for chemical products should be respected.

10.5 Incompatible Materials

CALCIUM CARBONATE : Acids

10.6 Hazardous Decomposition Products

In the event of thermal decomposition or fire, vapors potentially dangerous to health may be released.

CALCIUM CARBONATE     Calcium Oxides, Carbon Oxides.

11 Toxicological Information

According to currently available data, this product has not yet produced health damages. Anyway, it must be handled according to good industrial practices.

11.1 Information on Toxicological Effects

Acute effects: stinging eyes. Symptoms may include: rubescence, edema, pain and lachrymation. Contact with skin may cause: irritation, erythema, edema, dryness and chapped skin. Vapour inhalation may slightly irritate the upper respiratory tract. Ingestion may cause health disorders, including stomach pain and sting, nausea and sickness.

12 Ecological Information

Use this product according to good working practices. Avoid littering. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation.

CALCIUM CARBONATE

  • LD50 (Oral) : 6450 mg/kg Rat

TITANIUM DIOXIDE

  • LD50 (Oral) : > 10000 mg/kg Rat

12.1 Toxicity

No specific data are available for this product. Handle it according to good working practices. Avoid littering. Do not contaminate soil, sewers and waterways. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation. Please take all the proper measures to reduce harmful effects on aquifers.

12.2 Persistence & Degradability

Information not available.

12.3 Bioaccumulative Potential

Information not available.

12.4 Mobility in Soil

Information not available.

12.5 Results of PBT & vPvB assessment

Information not available.

12.6 Other Adverse Effects

Information not available.

13 Disposal considerations

13.1 Waste Treatment Methods

Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.

Disposal must be performed through an authorized waste management firm, in compliance with national and local regulations.

CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.

14 Transport Information

The product is not dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.

15 Regulatory Information

15.1 Safety, Health & Environmental Regulations/Legislation Specific for the Substance or Mixture

SEVESO CATEGORY     None

RESTRICTIONS RELATING TO THE PRODUCT OR CONTAINED SUBSTANCES PURSUANT TO ANNEX XVII TO EC REGULATION 1907/2006.
3

SUBSTANCES IN CANDIDATE LIST (ART. 59 REACH)
None

SUBSTANCES SUBJECT TO AUTHORIZATION (ANNEX XIV REACH)
None

HEALTHCARE CONTROL
Not Available

15.2 Chemical Safety Assessment

No chemical safety assessment has been processed for the mixture and the substances it contains.

16 Other Information

GENERAL BIBLIOGRAPHY

  1. Directive 1999/45/EC and following amendments
  2. Directive 67/548/EEC and following amendments and adjustments
  3. Regulation (EC) 1907/2006 (REACH) of the European Parliament
  4. Regulation (EC) 1272/2008 (CLP) of the European Parliament
  5. Regulation (EC) 790/2009 (I Atp. CLP) of the European Parliament
  6. Regulation (EC) 453/2010 of the European Parliament
  7. The Merck Index. – 10th Edition
  8. Handling Chemical Safety
  9. Niosh – Registry of Toxic Effects of Chemical Substances
  10. INRS – Fiche Toxicology (toxicological sheet)
  11. Patty – Industrial Hygiene and Toxicology
  12. N.I. Sax – Dangerous properties of Industrial Materials-7, 1989 Edition

NOTE FOR USERS

The information contained in the present sheet are based on our own knowledge on the date of the last version. Users must verify the suitability and thoroughness of provided information according to each specific use of the product.

This document must not be regarded as a guarantee on any specific product property.

The use of this product is not subject to our direct control; therefore, users must, under their own responsibility, comply with the current health and safety laws and regulations. The producer is relieved from any liability arising from improper uses.

FIELDS OF APPLICATION

TerraMare I is an ideal finish masonry paint, highly hydro-repellent and permeable, high exterior performance in all weather conditions, with excellent UV resistance. TerraMare I can be applied on virgin Portland cement stuccos, painted cement stuccos, reinforced concrete and plastic resin stuccos. TerraMare I can also be applied over concrete block or brick, painted and non-painted. Silossanic paints have a high performance with exposure to sun, rain and inclement weather conditions. Silossanic Paints are particularly suited in urban environments where carbon pollution, dirt, and chemicals are prevalent because of silossanic’s ability to self-clean during rain cycles.

TerraMare I can be used on aging cement stuccos and cement block where water penetration has become a destabilizing agent and stucco or block that is being effected by efflorescence or salt nitrate discoloration. TerraMare I is a non-aggregate paint, and dries to a flat mineral paint like sheen, so that colors and effect is similar to a historical lime wash or potassium silicate paint. Product can also be painted on new or old cement stuccos where high scrub-ability is desired, and is ideal for surfaces where unusual wet conditions exist.

PRODUCT FEATURES

This silossanic paint has very low VOC content and is completely permeable, breathable, hydro-repellent, self-cleaning and washable. Product has excellent anchorage to all new masonry surfaces, is a non-yellowing, non-thermoplastic, with high resistance to aging and UV damage. Paint sheen is flat/opaque, and when applied by brush creates very subtle chromatic variations. Product can be applied by brush, roller or sprayer, with full coverage achieved in two (2)-coats. Because of the hydro-repellent properties this paint has self-cleaning properties and does not permit the accumulation of dirt or pollution to deposit in the stucco pores of the surface, easily washing off by rain or with a light rinsing.

Silossanic paint is based on a silicone rubber water based formula, being made from silica (sand), and is an Eco-sustainable paint as described in the Eco Category description.

TYPE OF PRODUCT

Silossanic coating according to DIN 4108, based on silicone rubber with organic stabilizers. No acrylic binders used.

SHEEN FINISH

Flat

COLOR

White Base. Color tint up to 20% max with approved tints. Custom color tint matching available.

APPLICATION CYCLE INSTRUCTIONS

BRUSH AND ROLLER APPLICATIONS

1ST COAT     Apply TerraMare Sealer without dilution, to all new masonry surfaces prior to applying TerraMare I. Allow Sealer to dry for at least 8 – 12 hours. Dilute TerraMare I with 25% water, maximum 3.75 liters of water per one (1) 15-liter bucket of TerraMare I. Apply to surface with brush, roller or sprayer. Allow to dry for at least 8 – 12 hours.

2ND COAT     Apply TerraMare I diluted 25% using application tools as described above.

PAINT SPRAYERS

1ST COAT     Follow instructions indicated above except dilute TerraMare I with 20% water, maximum 3 liters of water per one (1) 15 liter bucket. Spray a consistent and even coat.

2ND COAT     Repeat instructions for 1st coat for paint sprayer.

SPRAY TIP USAGE     TerraMare I can easily be applied using an airless sprayer. Apply paint product with a # 0.019 – 0.021 mm size spray tip. Always use new spray tips for starting a paint job for best results. This will also conserve the amount of paint necessary to complete the job.

GRAIN SIZE     0.01 mm

MIXING PAINT & WATER

Most of our paint formulas are concentrated and require water to be added to them for proper use. This process means we can sell more coverage in an economical package that decreases the cost for transport, reduces the carbon footprint, helping the your pocket book and the environment.

Mix paint and water with an electric drill and paint paddle, or mix well by hand! If water is sitting on the top of your mixture, the paint is not properly mixed!

TOOLS 

Apply with brush, roller or with the an appropriate sprayer.

DRYING TIME

Allow a drying time between coats of at least eight (8) – twelve (12) hours. With lower temperature and humidity more time may be needed.

Do not apply TerraMare Sealer or TerraMare I on the exterior if there is a risk of thunder storms or showers during the 12 hour drying time needed for product to dry correctly.

CONSUMPTION/COVERAGE

Approximately 2,000 ft2 / 190 mt2 per 15 liters bucket. On rough or porous surfaces predict higher consumption. Determine exact consumption by performing a test on the surface to be treated.

PACKAGING

Plastic buckets of 1, 5 and 15 liters.

APPLICATION CYCLES ON DIFFERENT TYPES OF BASES

Make sure base is solid, dry and well cleaned, prepared with skill. It is recommended to observe the rule VOB DIN 18 363, Part C, paragraph 3.

New Cement Stuccos

New cement should not be painted for about 28 days to ensure proper anchoring and drying. Apply one (1)-coat of TerraMare Sealer non-diluted, with brush, roller or sprayer, and allow to dry for at least 8 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

EXTERIOR PAINTED WALLS

Dirty and/or contaminated surfaces should be cleaned and any attached algae or mold removed manually or by mechanical means, i.e., with a high-pressure washer. Apply 1 coat of EcoDis on dried surface and allow to dry for at least 12 hours where algae or mold has been present. If the exterior surface is porous or powdered 1 coat of TerraMare Sealer must be applied prior to application of TerraMare Grip. Apply 1 coat of TerraMare Grip according to instructions using brush or roller only and allow to dry for at least 8 hours, and then 2 coats of finish product TerraMare I.

If the acrylic paint surface has a flat sheen and is intact and in excellent to good condition then TerraMare I can be applied without the need of sealer or grip as a primer. For best results always use TerraMare Grip prior to application of TerraMare I.

SYNTHETIC STUCCO

Dirty and/or contaminated surfaces should be cleaned and any attached algae or mold removed manually or by mechanical means, i.e., with a high-pressure washer. Apply 1 coat of EcoDis on dried surface and allow to dry for at least 12 hours where algae or mold has been present. TerraMare Sealer is not required for application on acrylic surfaces. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

REINFORCED CONCRETE SURFACES

New cement should not be painted for about 28 days to ensure proper anchoring and drying. Apply 1 coat of EcoForte Consolidator (diluted 50% with water, or 2:1), allow to dry for at least 12 hours. Apply one (1)-coat of TerraMare Sealer non-diluted, with brush, roller, or sprayer and allow to dry for at least 8 – 12 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

Decaying or Crumbling Stuccos or Powdery Surfaces

Chalking surfaces, which could prevent the proper anchoring of the base coating must be removed and pressure washed. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1) on all damaged surfaces and allow to dry for at least 12 hours. Apply one (1)-coat of TerraMare Sealer non-diluted, with brush, roller, or sprayer and allow to dry for at least 8 – 12 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

Coatings with Efflorescence

Cement surfaces showing efflorescence should be removed with acid and thoroughly rinsed with water. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1), on all damaged surfaces and allow to dry for at least 12 hours. For coatings on surfaces damaged by the saltpeter or efflorescence no guarantees can be provided. Apply one (1)-coat of TerraMare Sealer non-diluted, with brush, roller or sprayer and allow to dry for at least 8 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

Aged Cement Stuccos

When new stucco repairs are performed on older cement stuccos, apply Potassium Silicate Concentrate diluted 100% with water (1:1), to older surfaces prior to applying new cement stucco. Dirty and/or contaminated surfaces should be cleaned and any attached algae removed manually or by mechanical means, i.e., with a high pressure washer. Stucco damaged by algae or mold should be treated with EcoDis prior to application of Potassium Silicate Concentrate. Apply 1 coat of EcoForte Consolidator diluted 100% with water (1:1) on all surfaces and allow to dry for at least 12 hours. Apply one (1)-coat of TerraMare Sealer non-diluted, with brush, roller or sprayer and allow to dry for at least 8 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

Stucco Repairs

See Aged Cement Stuccos above.

Mineral Paints or Lime Wash

Potassium Silicate Concentrate or EcoForte Consolidator can be applied on existing Mineral Paints or Lime Washes to consolidate worn or powdery bases prior to applying TerraMare Sealer. Apply EcoForte Consolidator product, diluted 100% with water (1:1), and allow to dry at least 12 hours. Apply 1 coat of TerraMare Sealer non diluted, and allow to dry for at least 12 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

Brick Surfaces

For consolidation of old brick and mortars: Dirty and/or contaminated surfaces should be cleaned and any attached algae removed manually or by mechanical means, i.e., with a high pressure washer. Apply 1 coat of Ecodis on dried surface and allow to dry for at least 12 hours. Apply 2 Coats of Potassium Silicate Concentrate, diluted 100% with water (1:1) in rapid succession. Allow double coat to dry for at least 12 hours. Apply 1 coat of TerraMare Sealer non diluted, and allow to dry for at least 12 hours. Apply one (1)-coat of TerraMare Grip diluted according to instructions using brush or roller only and allow to dry for at least 8 hours. Apply two (2)-coats of TerraMare I according to instructions indicated above.

STORAGE

Store in a cool, dry and protected from frost. Close the open containers with care. Store liquids only in plastic.

Warning!

Do not apply any products in direct exposure to strong/hot sunlight, rain, high humidity (mist) or in the presence of strong wind. Beware of the danger of frost overnight. If applied by roller or sprayer, protect surrounding surfaces as necessary. Protect eyes and skin from splashes of paint. Cover glass, ceramic, natural stone, brick, metal, wood, painted surfaces and glazed tiles. Clean affected areas immediately with water. Prominent elements of the building (cornices, parapets, etc.,) should be treated with skill, covering flashings, gutters, copper coatings, etc. …

Do not work in air temperature lower than 8°C / 46°F and not above 31°C / 88°F. Clean work tools with water immediately after use. Keep out of reach of children. In case of contact with eyes and skin, wash immediately with plenty of water. In cases of consumption, consult a Doctor or call the CDC Poison Center (see Safety Data Sheet).

Water Contamination Hazard

CLASS 1     This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of information required by the CPR, and it is classified as a non-hazardous material.

Product Contamination Hazard

CODE CER / NORMATIVE EAC / Decision commuted by the Commission n. 2000/532/CE

NOT DANGEROUS     The directive 75/442/CEE, 08 01 production, disposal, formulation, supply, use and removal of paints and varnishes: 10 13 04 for removal of paints and varnishes; 10 13 04 disposal of lime and hydrated lime products.

DISPOSAL

Do not enter product in its original concentration into drains or open waters. Do not store at public waste disposal sites. In case of conduction into adapted biological purification plants no disturbances need be expected. The preparation has been estimated by conventional method (Calculated-procedure of EG directive 1999/45/EG) and is classified as non-hazardous for the environment.

Dispose according to local regulations. Empty cans should be disposed of according to local regulations; plastic buckets are 100% PBS, NO. 5, approved for food storage; 100% recyclable if cleaned thoroughly prior to recycling.

ADDITIONAL INFORMATION

Warning: This Technical Sheet lists data collected on the basis of technique and experience. Given the multiplicity of use of the product they cannot be binding and the user can not refrain from using common sense and experience for the individual case. This information shall not constitute any legal obligation and no obligation from the seller or point of purchase, or any agreements inferred by employees who sale this product. Insurance or guarantees issued by our employees or employees should always be confirmed separately in writing. Any information about product adaptability and use of the product, must be verified by user prior to purchase. Check the exact consumption of product for the surface where product may be applied to determine amount of products needed. The color matching must be verified by the user before starting work.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close