Roma Logo
Translate ROMABIO Paints Website
EnglishFrenchGermanItalianSpanish
ENGLISH
FRENCH
GERMAN
ITALIAN
SPANISH

EcoDomus Satin

Interior/Exterior Mineral Paint

TDS
PDF files for Download

EcoDomus Satin is a high-performing, mineral paint for interior/exterior wall & trim finishes. It is an Eco-Sustainable paint product that is easy to use and can be applied on all types of interior/exterior surfaces with an appropriate primer.

 

Product Brochure     

 

 

Features: 

  • English satin/low gloss sheen
  • Washable & oil/food/stain proof
  • Ideal for high-traffic residential & commercial areas
  • No VOCs or solvents, Asthma-free & Hypoallergenic
  • Superior coverage & excellent durability
  • Odorless allowing for quick tenet turnaround
  • Naturally mold-resistant due to high pH content
  • Meets highest standards in Material Health with C2C Silver CertificationA+ rating for French VOC Emissions, & passed CA1350
  • Low carbon footprint with a concentrated formula
  • No flashing like other mineral based paints
  • Enhanced color, luminosity, depth, and beauty
  • Allows for best indoor air quality with negligible TVOC
  • Recommended for use in homes, offices, hospitals, & schools

 

 

Now that you have selected EcoDomus Satin for your project, here is what you need to start painting.

Get Your Tools

EcoDomus Satin can be applied with a brush, roller, or spray like any traditional paint. You will want tape, drop cloths, ladders or other items to prepare the surface. Get a separate mixing bucket to dilute with water before usage.

Tool-list

Mixing With Water

Domus Mineral Paints require water to be added prior to usage. Why?

  • Allows for a cleaner product by not having to add toxic stabilizers, and
  • Reduces our carbon footprint by up to 40%.

Mixing with water or diluting the product with water is as simple as pouring the concentrated paint into a separate, clean mixing bucket; then adding the amount of water listed below (dilution rate); and using a paddle drill or a spatula to mix thoroughly. You should mix for 2-4 minutes until there is uniform consistency with no standing water. The dilution rate varies by base type (Transparent or White) or color selection. The base type is labeled on the front and back of the paint bucket.

EcoDomus Satin Dilution

Rate

1 Liter 2.5 Liter 5 Liter 15 Liter
Transparent Base (darker color) 10% 100 ml 250 ml 500 ml 1.5 lt
White Base (lighter color) 25% 250 ml 625 ml 1.25 lt 3.75 lt

Prime the Surface

Properly prepare the surface and use the Recommended Primers for your surface type. More details can be find on the previous tab, product TDS, or on the back of the bucket.

Paint your Walls

Start painting and give enough drying time in between coats, approximately 4 – 8 hours for EcoDomus Satin. Two coats are recommended for most applications.

Testing & Certification

Cradle To Cradle Certified™

ROMABIO is currently the only paint manufacturer with 13 products Cradle To Cradle™ (C2C) Certified v3.1 in the world. The C2C certification is stringent, transparent, and administered by a 3rd party. It measures continuous improvement of products based upon five attributes: material health, material reutilization, renewable energy and carbon management, water stewardship, and social fairness. ROMABIO chose C2C certification above other green programs because it sets the highest standard in the building industry for sustainability and environmental health across multiple categories and requires bi-annual renewal with continuous improvement.

Interior and Exterior Paints 

cradle to cradle certified

Healthy Product Declaration™ (HPD)

Health Product Declaration (HPD) is a standard format for reporting product content and direct health hazards associated with exposure to its individual contents. An HPD for ROMABIO’s products can contribute to points for LEED v4 Materials and Resource Credit: Building product disclosure and optimization for Option 1: HPD must include Full Disclosure of Known Hazards for all intentional ingredients and residuals disclosed at least to 1,000 ppm.

Interior Paints

Exterior Paints

Indoor Air Quality Test Results

ROMA has passed the following stringent, high standard testing to reveal negligible impact to your indoor air:

  1. CDPH SM V1.1-2010 (CA01350) Emissions Test (per Section 8.5)
  2. ASTM D5116 Emissions Test Report with CDPH SM V1.1-2010
  3. French VOC Label Small Chamber Emissions Test and met the French VOC Label “A+” Class criteria.

IAQ Test Results

eurofins-logo call-recycle-logo cradle to cradle certified

Toxicity Verification Report

ROMABIO utilized ToxServices, a 3rd party verification agency with more than a decade of expertise in toxicology, risk assessment, comparative hazard assessment, and the application of science to promote human health and environmental sustainability, to verify the following claims for 8 interior and 6 exterior mineral paint products:

  1. ROMABIO interior/exterior mineral paint product formulations do not contain the following ingredients:
    1. APEO (Alkylphenol Ethoxylates)
    2. HCHO (Formaldehyde)
    3. PEG (Polyethylene Glycol)
    4. PG (Propylene Glycol)
  2. ROMABIO interior/exterior mineral paint product formulations do not contain chemicals associated with Sick Building Syndrome (SBS).
  3. ROMABIO paint products contain very low or no VOC’s.
  4. ROMABIO paint products do not contain any chemicals listed on the Declare Red List (Living Building Challenge).

Toxicity Report

tox-services-logo

Criteria Int. Standard Value Unit
TVOC & VOC (including tint pigments) 2004/42/CE 0.00 g/l
Water Absorption Coefficient EN 1062-3 – DIN 52617 0.05 kg/(m²•√h)
Vapor Permeability DIN 53122 < 35 Sd 1.9 g/m² (24 h)
Chalking Resistance ASTM-D-659 800 UV/Hour Condensation
Damp Abrasion Resistance (Gardner Cycles) EN 10795 – ISO 11998 Ideal < 5000
Surface Retention Smog/Dirt EN 10795 Very Low ≤ 3
Drying Time at Low Temperature U UNI 10793 > 5 °C
Application on Damp Cement NHL 3.5/5.0 U UNI EN 13300 Ideal
Potassium Silicate Opaque Paint for Interior Use DIN 18363 Paragraph 2.4.1
Application Quality U UNI 10794 Good
Hide and Cover Capacity ISO 6504-3 M.U. 1631 (RC 100 μm Humid) Class 2 < 96 – < 98
pH Value DIN 19266 9.2 w / 11 t
Natural Resistance to Mold DIN 19266
Alkaline Resistance U UNI 10795 Excellent
Specific Gravity (23°C) EN ISO 2811-2 1.05 g/ml
Granulation DIN 19643 – EN 21524 0.0 – 0.01 mm
Gloss Level U NI EN ISO 2813 < 55 Semi-Gloss
Reaction to Fire EN 13501-1:2002 A 1 Incombustible
Toxicity EN 13501-1:2002 Non-Toxic
ECOLABEL CEE 88/379 3 – 4 – 7 – 8 Criteria ECOLABEL
ECOLABEL APEO FREE Exempt of Butyl Phthalate(DBP) Dioctyl Phthalate (DOP) 2-Ethylhexyl Phthalate (DOP)
APEO (Alkyl Phenol Ethoxylates) 0%
PEG (Polyethylene Glycol) 0%
PG (Propylene Glycol) 0%
Formaldehyde 0%
Biocides 0%

Does not contain chemicals that can aggravate or cause asthma, see NIH Asthma Report 2012.

 

 

1 Identification of the Substance/Mixture & of the Company/Undertaking

1.1 Product Identifier

Code     None
Product Name     EcoDomus Satin

1.2 Relevant Identified Uses of the Substance or Mixture & Uses Advised Against

Intended Use     Paint for Interior

1.3 Details of the Supplier of the Safety Data Sheet

  • Name     ROMA – Eco-Sustainable Building Technologies
  • Full Address     554 North Avenue NW, Suite B
  • District & Country Atlanta, GA 30318 | United States of America (USA)
  • 678-905-3700

1.4 Emergency Telephone Number

For Urgent Inquiries Refer To     Call 911 if you have a poison emergency.
Call the CDC if swallowed but person is alert 1-800-222-122

2 Hazards Identification

2.1 Classification of the Substance or Mixture

The product is classified as hazardous pursuant to the provisions set forth in Directives 67/548/EEC and 1999/45/EC and/or EC Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). The product thus requires a safety data sheet that complies with the provisions of EC Regulation 1907/2006 and subsequent amendments.

Any additional information concerning the risks for health and/or the environment are given in sections 11 and 12 of this sheet.

  • Danger Symbols     Xi
  • R Phrases     36/38

The full wording of the Risk (R) and hazard (H) phrases is given in section 16 of the sheet.

2.2 Label Elements

Hazard labeling pursuant to Directives 67/548/EEC and 1999/45/EC and subsequent amendments and supplements.

  • S2: Keep Out Of The Reach Of Children.
  • S25: Avoid Contact With Eyes.
  • S26: In Case Of Contact with Eyes, Rinse Immediately with Plenty of Water and Seek Medical Advice.
  • S37: Wear Suitable Gloves.
  • S46: If Swallowed, Seek Medical Advice Immediately and Show this Container or Label.

2.3 Other Hazards

Information not available.

3 Composition/Information on Ingredients

3.1 Substances

Information not relevant.

3.2 Mixtures

Identification Conc. % Class. 67/548/EEC Class. 1272/2008 (CLP)
SILICIC ACID, POTASSIUM SALT
CAS        1312-76-1 2 – 2.2  Xi R36/38  Eye Irrit. 2 H319, Skin Irrit. 2 H315
EC          215-199-1
INDEX     –
Reg. No. 01-2119456888-17

T+ = Very Toxic (T+), T = Toxic(T), Xn = Harmful (Xn), C = Corrosive (C), Xi = Irritant (Xi), O = Oxidizing (O), E = Explosive(E), F+ = Extremely Flammable(F+), F = Highly Flammable(F), N = Dangerous for the Environment (N)

The full wording of the Risk (R) and hazard (H) phrases is given in section 16 of the sheet.

First Aid Measures

4.1 Description of First Aid Measures

No harm to the staff authorized to use has been reported. However, in case of contact, inhalation or ingestion, the following general measures provided for a first aid shall be taken.

  • EYES & SKIN     Wash with plenty of water; if the irritation persists, seek medical advice.
  • INHALATION     Remove to open air. If respiration is difficult, administer artificial respiration and seek medical advice.
  • INGESTION     Seek medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.

4.2 Most Important Symptoms & Effects, Both Acute & Delayed

No episodes of damage to health ascribable to the product have been reported.

4.3 Indication of Any Immediate Medical Attention & Special Treatment Needed

Follow doctor’s orders.

5 Firefighting Measures

5.1 Extinguishing Media

SUITABLE EXTINGUISHING MEDIA
The extinction equipment should be of the conventional kind: carbon dioxide, foam, powder and nebulized water.

EXTINGUISHING MEDIA WHICH SHALL NOT BE USED FOR SAFETY REASONS
None in particular.

5.2 Special Hazards Arising from the Substance or Mixture

HAZARDS CAUSED BY EXPOSURE IN THE EVENT OF FIRE
Do not breathe combustion products (carbon oxide, toxic pyrolysis products, etc.).

5.3 Advice for Firefighters

GENERAL INFORMATION
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health. Always wear full fire prevention gear. Collect extinguishing water to prevent it from draining into the sewer system. Dispose of contaminated water used for extinction and the remains of the fire according to applicable regulations.

SPECIAL PROTECTIVE EQUIPMENT FOR FIRE-FIGHTERS
Hardhat with visor, fireproof clothing (fireproof jacket and trousers with straps around arms, legs and waist), work gloves (fireproof, cut proof and antistatic), a depressurized mask with facemask covering the whole of the operator’s face or a self-respirator (self-protector) in the event of large quantities of fume.

6 Accidental Release Measures

6.1 Personal Precautions, Protective Equipment & Emergency Procedures

Eliminate all sources of ignition (cigarettes, flames, sparks, etc.) from the leakage site. If there are no contraindications, spray solid products with water to prevent the formation of dust. Use breathing equipment if fumes or powders are released into the air. Block the leakage if there is no hazard. Do not handle damaged containers or the leaked product before donning appropriate protective gear. For information on risks for the environmental and health, respiratory tract protection, ventilation and personal protection equipment, see the other sections of this sheet. These indications apply for both processing staff and those involved in emergency procedures.

6.2 Environmental Precautions

The product must not penetrate the sewers, surface water, ground water and neighboring areas.

6.3 Methods & Material for Containment & Cleaning Up

Use inert absorbent material (sand, vermiculite, diatomaceous earth, Kieselguhr, etc.) to soak up leaked product. Collect the majority of the remaining material and deposit it in containers for disposal. If there are no contraindications, use jets of water to eliminate product residues. Make sure the leakage site is well aired. Contaminated material should be disposed of in compliance with the provisions set forth in point 13.

6.4 Reference to Other Sections

Any information on personal protection and disposal is given in sections 8 and 13.

7 Handling & Storage

7.1 Precautions for Safe Handling

ADVICES ON SAFE HANDLING
Do not smoke while handling and use.

PRECAUTIONS AGAINST FIRE AND EXPLOSION
No special measures are required.

7.2 Conditions for Safe Storage, Including Any Incompatibilities

Store in a well-ventilated place; keep far away from sources of heat, bright flames and sparks and other sources of ignition.

7.3 Specific End Use(s)

Information not available.

8 Exposure Controls/Personal Protection

8.1 Control Parameters

Name Type Country TWA/8h STEL/15min
mg/m3 ppm mg/m3 ppm
TALC TLV–ACGIH 2
OEL IRL 0.8
WEL UK 1

8.2 Exposure Controls

As the use of adequate technical equipment must always take priority over personal protection equipment, make sure that the workplace is well aired through effective local aspiration or bad air vent. If such operations do not make it possible to keep the concentration of the product below the permitted workplace exposure thresholds a suitable respiratory tract protection must be used. See product label for hazard details during use. Personal protection equipment must comply with the rules in force indicated below.

HANDLING PROTECTION
Protect hands with category II (ref. Directive 89/686/EEC and standard EN 374) work gloves, such as those in PVC, neoprene, nitrite or equivalent. The following should be considered when choosing work glove material: degradation, breakage times and permeation. Work glove resistance to preparations should be checked before use, as it can be unpredictable. Gloves’ limit depends on the duration of exposure.

EYE PROTECTION
Wear protective airtight goggles (ref. standard EN 166).

SKIN PROTECTION
Wear category II professional long-sleeved overalls and safety footwear (ref. Directive 89/686/CEE and standard EN 344). Wash body with soap and water after removing overalls.

RESPIRATORY PROTECTION
If the threshold value (if available) for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company’s prevention and protection service is exceeded, wear a mask with an B or universal filter, the class (1, 2 or 3) of which must be chosen according to the limit concentration of use (ref. standard EN 141).

The use of respiratory tract protection equipment, such as masks like that indicated above, is necessary to reduce worker exposure in the absence of technical measures. The protection provided by masks is in any case limited.

If the substance in question is odorless or its olfactory threshold is higher than the relative exposure limit and in the event of an emergency, or when exposure levels are unknown or the concentration of oxygen in the workplace is less than 17% volume, wear self-contained, open-circuit compressed air breathing apparatus (ref. standard EN 137) or fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece (ref. standard EN 138).

9 Physical & Chemical Properties

9.1 Information on Basic Physical & Chemical Properties

Appearance Liquid
Color Color Palette
Odor Characteristic
Odor Threshold
pH 9 – 10
Melting or Freezing Point
Boiling Point
Distillation Range
Flash Point > 61°C
Evaporation Rate
Flammability of Solids & Gases
Lower Inflammability Limit
Upper Explosive Limit
Lower Explosive Limit
Vapor Pressure at 20°C
Vapor Density at 20°C
Specific Gravity 1.480 Kg/l
Solubility Water
Solvent Separation Test
Solid Content
Partition Coefficient: Octanol/Water
Ignition Temperature
Decomposition Temperature
Viscosity
Reactive Properties

9.2 Other Information

VOC (Directive 2004/42/EC) < 0.064 g/lt

Matt coatings for interior walls and ceilings. EU limit value for this product
(cat. A / a): 75 g/lt (2007) / 30g/lt (2010).

10 Stability & Reactivity

10.1 Reactivity

There are no particular risks of reaction with other substances in normal conditions of use.

CALCIUM CARBONATE     Decomposes at temperatures above 800°C.

10.2 Chemical Stability

The product is stable in normal conditions of use and storage.

10.3 Possibility of Hazardous Reactions

No hazardous reactions are foreseeable in normal conditions of use and storage.

10.4 Conditions to Avoid

None in particular, however the usual precautions used for chemical products should be respected.

10.5 Incompatible Materials

CALCIUM CARBONATE     Acids

10.6 Hazardous Decomposition Products

In the event of thermal decomposition or fire, vapors potentially dangerous to health may be released.

CALCIUM CARBONATE     Calcium Oxides, Carbon Oxides.

11 Toxicological Information

Toxicological data are not available

ACUTE TOXICITY
Toxicological data are not available.

IRRITANT AND CORROSIVE EFFECTS
Toxicological data are not available.

SENSITIZATION
Toxicological data are not available.

SPECIFIC TARGET ORGAN TOXICITY
Toxicological data are not available.

ASPIRATION HAZARD
Toxicological data are not available.

CMR EFFECTS (CARCINOGENICITY, MUTAGENICITY AND TOXICITY FOR REPRODUCTION)
Toxicological data are not available.

PRACTICAL EXPERIENCE
Other Observations

Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin resulting in non-allergic contact dermatitis and/or absorption through skin. Splashing may cause eye irritation and reversible damage.

OVERALL ASSESSMENT ON CMR PROPERTIES
The components in this formulation do not meet the criteria for classification as CMR category 1 or 2.

There is no information available on the preparation itself . The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and has not been classified.

12 Ecological Information

No specific data are available for this product. Handle it according to good working practices. Avoid littering. Do not contaminate soil, sewers and waterways. Inform the competent authorities, should the product reach waterways or sewers or contaminate soil or vegetation. Please take all the proper measures to reduce harmful effects on aquifers.

12.1 Toxicity

Information not available.

12.2 Persistence & Degradability

Information not available.

12.3 Bioaccumulative Potential

Information not available.

12.4 Mobility in Soil

Information not available.

12.5 Results of PBT & vPvB assessment

Information not available.

12.6 Other Adverse Effects

Information not available.

13 Disposal Considerations

13.1 Waste Treatment Methods

Reuse, when possible. Product residues should be considered special hazardous waste. The hazard level of waste containing this product should be evaluated according to applicable regulations.

Disposal must be performed through an authorized waste management firm, in compliance with national and local regulations.

CONTAMINATED PACKAGING
Contaminated packaging must be recovered or disposed of in compliance with national waste management regulations.

14 Transport Information

The product is no Dt dangerous under current provisions of the Code of International Carriage of Dangerous Goods by Road (ADR) and by Rail (RID), of the International Maritime Dangerous Goods Code (IMDG), and of the International Air Transport Association (IATA) regulations.

15 Regulatory Information

15.1 Safety, Health & Environmental Regulations/Legislation Specific for the Substance or Mixture

SEVESO CATEGORY     None

RESTRICTIONS RELATING TO THE PRODUCT OR CONTAINED SUBSTANCES PURSUANT TO ANNEX XVII TO EC REGULATION 1907/2006.
3

SUBSTANCES IN CANDIDATE LIST (ART. 59 REACH)
None

SUBSTANCES SUBJECT TO AUTHORIZATION (ANNEX XIV REACH)
None

HEALTHCARE CONTROLS
Workers exposed to this chemical agent must not undergo health checks, provided that available risk-assessment data prove that the risks related to the workers’ health and safety are modest and that the 98/24/EC directive is respected.

15.2 Chemical Safety Assessment

No chemical safety assessment has been processed for the mixture and the substances it contains.

16 Other information

Text of hazard (H) indications mentioned in section 2-3 of the sheet

  • Eye Irrit. 2     Eye irritation, category 2
  • Skin Irrit. 2     Skin irritation, category 2
  • H319     Causes serious eye irritation.
  • H315    Causes skin irritation.

Text of risk (R) phrases mentioned in section 2-3 of the sheet:

  • R36/38 Irritating to eyes and skin.

GENERAL BIBLIOGRAPHY

  1. Directive 1999/45/EC and following amendments
  2. Directive 67/548/EEC and following amendments and adjustments
  3. Regulation (EC) 1907/2006 (REACH) of the European Parliament
  4. Regulation (EC) 1272/2008 (CLP) of the European Parliament
  5. Regulation (EC) 790/2009 (I Atp. CLP) of the European Parliament
  6. Regulation (EC) 453/2010 of the European Parliament
  7. The Merck Index. – 10th Edition
  8. Handling Chemical Safety
  9. Niosh – Registry of Toxic Effects of Chemical Substances
  10. INRS – Fiche Toxicology (toxicological sheet)
  11. Patty – Industrial Hygiene & Toxicology
  12. N.I. Sax – Dangerous properties of Industrial Materials-7, 1989 Edition

NOTE FOR USERS

The information contained in the present sheet are based on our own knowledge on the date of the last version. Users must verify the suitability & thoroughness of provided information according to each specific use of the product.

This document must not be regarded as a guarantee on any specific product property.

The use of this product is not subject to our direct control; therefore, users must, under their own responsibility, comply with the current health & safety laws & regulations. The producer is relieved from any liability arising from improper uses.

FIELDS OF APPLICATION

EcoDomus Satin is a two (2) coat finish paint for interior & exterior wall surfaces & trim. EcoDomus Satin is not self-priming and therefore requires an approved primer coat for application on new drywall, masonry and wood surfaces. A non-acrylic paint product providing superior adhesion, with high resistance to mold growth, without the need for biocide additives.

EcoDomus Satin, as with all the Domus line mineral paints, is designed to be diluted with water, providing a paint applicator optimal ranges of dilution to adjust the paint’s thickness and density as per job site application may require. Dilution rates for applications for wall & trim paint may be adjusted from 20 – 30% according to type of coverage required.

EcoDomus Satin is ideal for new surfaces as well as repaints on existing interior & exterior surfaces, and provides an English satin sheen or low gloss sheen. EcoDomus Satin is ideal for applications on wood trim, cabinets and furniture. Exterior virgin wood surfaces require a primer coat with primer EcoDomus Matte, followed by two coats of finish. Interior virgin wood surfaces require EcoDomus Matte as a primer, followed by two coats of finish.

EcoDomus Satin can be applied to brick, cementitious and MGO boards, as well as to stucco when using an approved primer.

Dilutions with water are suggested as general guidelines for application, but paint applicator may adjust dilutions as needed to meet best uses for ease of application, job site requirements and finishes.

PRODUCT FEATURES

A 77% natural mineral product, with good permeability, breathable, absorbs CO2, provides good anchoring power with mineral surfaces by petrification (water glass); and will bond to the mineral content on the substrate. Provides protection against the formation of bacteria that forms mold. Product is considered an Eco-Sustainable product, ideal for use in homes, schools, hospitals, and chemical sensitive areas.

This paint product is an oil proof, washable satin finish that cannot be damaged by foods, greases, body oils, color crayons or washable colored markers. Cleaning does not essentially change the sheen of and may require whole wall repaints.

Domus line mineral paints (potassium silicates) require an average 14 days to fully cure and will continue to micro-crystallize for 7 – 8 years. Care must be given for newly painted surfaces to minimize damages resulting from soiling, over zealous cleaning and tape masking.

EcoDomus Satin is specifically designed to be tinted with natural earth oxide tints and 0% VOC colorants to increase esthetic color values with minimal environmental impact and toxin-free indoor air quality. EcoDomus Satin is category ECO which means Eco-Sustainable containing at least 75% natural raw materials, and the other 25% inert binders and non-toxic chemicals.

TYPE OF PRODUCT

Silicate coating according to DIN 18363, based on potassium silicate with organic stabilizers. No acrylic binders used.

SHEEN FINISH

Satin

COLOR

White / Transparent Base. Color tint up to 5% max with approved tints for white base, 20% max with approved tints for transparent base. Custom color tint matching are available.

GENERAL APPLICATION INSTRUCTIONS

WHITE

BRUSH & ROLLER APPLICATIONS

PRIMER COAT / INTERIOR: Apply 1 coat of EcoDomus Matte as a primer, diluted with 20 – 25% water, or 3 – 3.75 liters of water per one (1) 15 liter bucket. EcoDomus Matte can be brushed, rolled or sprayed onto all types of new drywall and any type of trim, painted or unpainted. Allow primer to dry for 4 – 8 hours before applying EcoDomus Satin.

PRIMER COAT / EXTERIOR: Apply 1 coat of EcoDomus Matte as a primer, diluted with 30% water, or 4.5 liters of water per one (1) 15 liter bucket. EcoDomus Matte can be brushed, rolled or sprayed with an approved sprayer. Allow primer to dry for 8 – 12 hours before applying EcoDomus Satin.

1ST COAT: Dilute EcoDomus Satin with 20 – 25% water, or 3 – 3.75 liters of water per one (1) 15 liter bucket. Apply paint in an even and constant pattern, so that a perfect coverage is achieved. Allow 4 – 8 hours to dry before proceeding with a 2nd coat.

2ND COAT: Dilute EcoDomus Satin with 20 – 25% water, or 3 – 3.75 liters of water per one (1) 15 liter bucket. Apply paint in an even and constant pattern, so that a perfect coverage is achieved.

PAINT SPRAYERS

PRIMER COAT / INTERIOR: Apply 1 coat of EcoDomus Matte as a primer, diluted with 20 – 25% water, or 3 – 3.75 liters of water per one (1) 15 liter bucket. EcoDomus Matte can be sprayed onto all types of new drywall and any type of trim, painted (see PAINTED WOOD for instructions) or unpainted. Allow primer to dry for 4 – 8 hours before applying EcoDomus Satin.

PRIMER COAT / EXTERIOR: Apply 1 coat of EcoDomus Matte as a primer, diluted with 30% water, or 4.5 liters of water per one (1) 15 liter bucket. EcoDomus Matte can be brushed, rolled or sprayed with an approved sprayer.

1ST COAT: Dilute EcoDomus Satin with 20 – 25% water, or 3 – 3.75 liters of water per one (1) 15 liter bucket of and apply to prepared base coat. Do not attempt to cover walls or surfaces with one (1)-coat, as product may appear semi-transparent on 1st coat. Over spraying will result in excessive waste of product. Allow to dry for at least 4 hours before applying 2nd coat.

2ND COAT: Dilute EcoDomus Satin with 20 – 25% water, or 3 – 3.75 liters of water per one (1) 15 liter bucket of and apply with a sprayer if applicator chooses not use a paint roller cover for the 2nd coat.

Touch-ups with any type of sheen type paint such as eggshell and satin, is very difficult. Application of final coat using a sprayer without the use of back rolling provides the most attractive finish, but this makes repaints or repairs in the future difficult with rollers or brushes, as sprayers generally cannot be used in inhabited spaces. Thus back rolling on all walls may be obligatory for future repaints. Back rolling should occur immediately after wall area has been sprayed. Do not try to back roll if sprayed paint has dried on the wall.

TRANSPARENT BASE

EcoDomus Satin should be diluted with a minimum of 5% water, or 750 ml per one (1) 15 liter bucket, but recommended dilution is 10% or 1.5 liters of water per one (1) 15 liter bucket. Apply to a prepared base coat and follow application instructions as indicated above.

GRAIN SIZE: 0.01 mm

SPRAY TIP USAGEEcoDomus Satin can easily be applied using an airless sprayer. Apply paint product with a #0.019 – 0.021 inch (0.48 – 0.53 mm) size spray tip. Always use new spray tips for starting a paint job for best results. This will also conserve the amount of paint necessary to complete the job.

MIXING PAINT & WATER

ROMA’s Domus line mineral paint formulas are concentrated and require water to be added to them for proper use. This concentrated formula means more coverage in each bucket, decreasing the cost for transport, and reducing our carbon footprint. We do not have to add toxic preservatives or anti-microbial to increase shelf life like most acrylic paint products.

Mix paint and water with an electric drill, paint paddle, or mix well by hand! If water is sitting on the top of your mixture, the paint is not properly mixed!

TOOLS

Apply with brush, roller or with an appropriate sprayer and sprayer tip. New sprayer tips should be used to prevent product waste and provide for a more perfect finish.

TOOL CLEANING

Brush, roller, rags, or sponges should be cleaned immediately after use with water and a mild detergent or dish soap.

DRYING TIME

Allow a drying time between coats of at least 4 – 8 hours with a maximum of 2 coats EcoDomus Satin. With lower temperature and humidity more time may be needed. Allow at least 24 hours drying time before attempting washing or applying additional products or other finishes. Complete curing occurs within 14 days, and with silicification, hardness will increase to approximate full strength in three (3)-months.

CONSUMPTION/COVERAGE

Approximately 2,550 – 2,700 ft2 / 237 – 250 mt2 per 15 liters bucket diluted with 3 liters water. Determine exact consumption by performing a test on the surface to be treated.

PACKAGING

Plastic buckets of 1, 5 and 15 liters.

APPLICATION CYCLES ON DIFFERENT TYPES OF BASES

Make sure base is solid, dry and well cleaned, prepared with skill. It is recommended to observe the rule VOB DIN 18363, Part C, paragraph 3.

New Drywall

PRIMER: EcoDomus Matte is an excellent primer and consolidator for new grey-board, blue-board, and green-board drywalls. Drywall surfaces should be carefully sanded prior to application of EcoDomus Matte. This product permits minimum drywall joint compound repairs and backsanding without peeling. EcoDomus Matte is a very strong and durable paint, and once dry is not easily sandable. Drywall repairs should be carefully primed with EcoDomus Matte diluted 20 – 25% with water, prior to application of 1st and 2nd coat of EcoDomus Satin.

1ST & 2ND COATS: Apply EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS.

PLASTER APPLICATIONS ON NEW DRYWALL: EcoDomus Satin cannot be used as a consolidator for use on drywall for the application of slaked lime plasters or lime paint products.

PAINTED DRYWALL

EcoDomus Satin can be applied directly to pre-painted surfaces without the use of a primer, except for walls that have been painted with High Gloss paints, oil or latex. BioGrip Micro should be applied to high sheen surfaces prior to application of EcoDomus Satin (if surface is properly sanded & prepped this process may be avoided). Apply one (1)-coat of BioGrip Micro diluted 30% with water, and allow to dry for 8 – 12 hours (if needed). Apply one (1) coat of EcoDomus Matte, followed by two (2) applications of EcoDomus Satin.

UNPAINTED WOOD

INTERIOR: EcoDomus Satin should not be applied to most types of wood products without using EcoDomus Matte as a primer.

Sand all wood surfaces as required to provide a smooth surface and lightly wipe wood surfaces with a damp cloth or tack cloth to remove all traces of dust. Fill all nail and screw holes with non-oil type putty or wood filler. Apply water based caulk as needed to fill all voids and cracks. Caulked areas may need at least 12 hours to properly dry. Apply 1 coat EcoDomus Matte as a primer with a brush or an approved paint sprayer, and allow to dry for at least 8 hours. Apply EcoDomus Satin according to instructions. When painting on wood it is suggested to adjust dilutions with water as necessary to achieve maximum effect for smoothness and coverage desired. Typical dilutions may be up or down by 5% as a rule.

EXTERIOR: EcoDomus EggShell should not be applied to most types of wood products without using EcoDomus Matte as a primer.

Sand all wood surfaces as required to provide a smooth surface and lightly wipe wood surfaces with a damp cloth or tack cloth to remove all traces of dust. Fill all nail and screw holes with non-oil type putty or wood filler. Apply water based caulk as needed to fill all voids and cracks. Caulked areas may need at least 12 hours to properly dry. Apply 1 coat of EcoDomus Matte as a primer with a brush or an approved paint sprayer, and allow to dry for at least 8 hours. Apply EcoDomus EggShell according to instructions. When painting on wood it is suggested to adjust dilutions with water as necessary to achieve maximum effect for smoothness and coverage desired. Typical dilutions may be up or down by 5% as a rule.

PAINTED WOOD

INTERIOR / EXTERIOR: Sand all painted wood surfaces if needed to provide a smooth surface. Fill all nail and screw holes with non-oil type putty or wood filler. Apply water based caulk as needed to fill all voids and cracks. Paint all caulked areas as needed and allow to dry for at least 12 hours. Remove all dust from area to be painted. Lightly wipe wood surfaces with a damp cloth or tack cloth to remove all traces of dust. Spot prime any unpainted repairs, wood filler, caulk and prime with EcoDomus Matte, diluted 20 – 25% for Interior use, EcoDomus Matte as a primer, diluted 30% for Exterior use before proceeding with applying two (2) coats of EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS.

When painting on wood it is suggested to adjust dilutions with water as necessary to achieve maximum effect for smoothness and coverage desired. Typical dilutions may be up or down by 5% as a rule.

CAULKS

EcoDomus Satin will adhere to most non solvent-based caulks, acrylic caulks, and some silicone water-based caulks. Always test product for adhesion verification prior to painting any surface. Silicone based caulks cannot be painted with any type of paint.

SLAKED LIME PLASTER & STUCCOS

INTERIOR / EXTERIOR: EcoDomus Satin cannot be applied directly to slaked lime plasters and stuccos like BioCement GF and/or BioMarmorino Satin. Apply 1 coat of EcoForte Consolidator and allow to dry for at least 8 – 12 hours. Apply one (1) coat of BioGrip Micro as a primer and allow to dry for at least 8 – 12 hours. Apply two (2) coats of EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS.

NEW CEMENT STUCCOS

INTERIOR / EXTERIOR: New portland cement stucco should not be painted for about 21 – 28 days to ensure proper curing, anchoring and drying. Apply 1 coat of EcoForte Consolidator and allow to dry for at least 8 – 12 hours. Apply one (1) coat of BioGrip Micro as a primer and allow to dry for at least 8 – 12 hours. Apply two (2) coats of EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS.

CAUTION!

New portland cement stuccos should be tested for pH using Phenolphthalein, also sold as an “alkalinity test kit”. This product should be spot tested on all new portland cement stucco prior to the application of any type of finish, paint or stucco product. Concrete has a naturally high pH due to the calcium hydroxide formed when portland cement reacts with water. As the concrete reacts with carbon dioxide in the atmosphere, pH decreases to 8.5 – 10.5. When a 1% phenolphthalein solution is applied to uncured concrete, it turns bright pink/purple; if it remains colorless, it shows that the concrete has undergone correct carbonation. When the test indicates bright pink or purple, this indicates that no paint or plaster product of any type should be applied to the concrete until carbonization has been completed, which usually occurs after 21 – 28 days after final installation.

DECAYING OR CRUMBLING STUCCOS OR POWDERY SUFACES

INTERIOR / EXTERIOR: Chalking surfaces, which could prevent the proper anchoring of the base coating must have damaged and chalky portions be removed by pressure washing and scraping. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1) on all damaged surfaces, applying 2 – 3 coats in rapid succession, wet on wet, until substrate has arrived at full absorption, and allow to dry for at least 8 – 12 hours. Apply 1 coat EcoForte Consolidator, allow to dry for at least 8 – 12 hours. Apply one (1) coat of BioGrip Micro as a primer and allow to dry for at least 8 – 12 hours. Apply two (2) coats of EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS.

COATING WITH EFFLORESCENCE

INTERIOR / EXTERIOR: Cement surfaces showing efflorescence should be aggressively cleaned with a high pressure washer, and then the efflorescence should be treated using a diluted muriatic acid, 1 part muriatic acid and 6 – 7 parts water, and allow to react for 3 – 5 minutes. Thoroughly rinse treated areas with water. Apply Potassium Silicate Concentrate, diluted 100% with water (1:1) on all damaged surfaces and allow to dry for at least 12 hours. Apply 1 coat EcoForte Consolidator (diluted according to instructions), and allow to dry for at least 8 – 12 hours. For best results apply BioGrip Micro, diluted with water 30%, and allow to dry for at least 8 – 12 hours. Apply two (2) coats of EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS. For coatings on surfaces damaged by the saltpeter or efflorescence no guarantees can be provided.

AGED CEMENT STUCCOS

INTERIOR / EXTERIOR: When new stucco repairs are performed on older cement stuccos, apply EcoForte Consolidator diluted 100% with water (1:1), to older surfaces prior to applying new cement stucco. Apply EcoForte Consolidator on new repairs and allow to dry to 8 – 12 hours. Dirty and/or contaminated surfaces should be cleaned. Stucco damaged by algae or mold should be treated with EcoDis. Apply one (1) coat of BioGrip Micro as a primer and allow to dry for at least 8 – 12 hours. Apply two (2) coats of EcoDomus Satin as indicated in GENERAL APPLICATION INSTRUCTIONS.

STUCCO REPAIRS

See AGED CEMENT STUCCOS above.

BRICK

INTERIOR / EXTERIOR: For best use apply BioGrip Micro, diluted with water 30%, and allow to dry for at least 8 – 12 hours. Apply 2 – 3 coats of EcoDomus Satin as needed to acquire full coverage, following GENERAL APPLICATION INSTRUCTIONS. To reduce excessive texture created from rolling or hand brush work, apply with a sprayer.

STORAGE

Store in a cool, dry place, protected from frost. Close the open containers with care. Store liquids only in plastic. Transfer unused paint into smaller containers to create a full bucket, reducing exposure to air. For best results turn bucket upside-down to prevent air leaking into container.

WARNING!

Do not apply any products in direct exposure to strong/hot sunlight, rain, mist, high humidity (> 80%), at dew-point formation, or in the presence of strong wind. Beware of the danger of frost overnight. If applied by roller or sprayer, protect surrounding surfaces as necessary. Protect eyes and skin from splashes of paint. Cover glass, ceramic, natural stone, brick, metal, wood, painted surfaces and glazed tiles. Clean affected areas immediately with water. Prominent elements of the building (cornices, parapets, etc.,) should be treated with skill, covering flashings, gutters, copper coatings, etc. …

Do not work in air temperature lower than 10°C / 50°F and not above 31°C / 88°F. Clean work tools with water immediately after use. Keep out of reach of children. In case of contact with eyes and skin, wash immediately with plenty of water. In cases of consumption, consult a Doctor or call the CDC Poison Center (see Safety Data Sheet).

If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect yourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to www.epa.gov/lead.

WATER CONTAMINATION HAZARD

CLASS 1: This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of information required by the CPR, and it is classified as a non-hazardous material.

PRODUCT CONTAMINATION HAZARD

CODE CER / NORMATIVE EAC / Decision commuted by the Commission n. 2000/532/CE

NOT DANGEROUS: The directive 75/442/CEE, 08 01 production, disposal, formulation, supply, use, and removal of paints and varnishes: 10 13 04 for removal of paints and varnishes; 10 13 04 disposal of lime and hydrated lime products.

DISPOSAL

Do not store at public waste disposal sites. In case of conduction into adapted biological purification plants no disturbances need be expected. The preparation has been estimated by conventional method (calculated-procedure) of EG directive 1999/45/EG) and is classified as non-hazardous for the environment.

Dispose according to local regulations. Empty cans should be disposed of according to local regulations; plastic buckets are 100% PBS, no. 5, approved for food storage; 100% recyclable if cleaned thoroughly prior to recycling.

ADDITIONAL INFORMATION

This Technical Sheet lists data collected on the basis of technique and experience. Given the multiplicity of use of the product they cannot be binding and the user can not refrain from using common sense and experience for the individual case. This information shall not constitute any legal obligation and no obligation from the seller or point of purchase, or any agreements inferred by employees who sale this product. Insurance or guarantees issued by our employees or employees should always be confirmed separately in writing. Any information about product adaptability and use of the product, must be verified by user prior to purchase. Check the exact consumption of product for the surface where product may be applied to determine amount of products needed. The color matching must be verified by the user before starting work. No refunds or exchanges will be provided for tinted products after they have been consumed or applied.

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close